Volkswagen Jetta & Golf (1994-99) Installation Instructions PDF

INSTALLATION INSTRUCTIONS VOLKSWAGEN JETTA & GOLF (1994-99) VOLKSWAGEN CABRIO (1998-99) (Old body style only)
PART NUMBER: VW-50-94 Pro.Fit logo and part number will be right side up and readable when installed.
TOOLS REQUIRED: Hook tool, #1 Phillips screwdriver.
PARTS INCLUDED: Pro.Fit VSMTM, instructions.
LOCATION: To the right of the climate control.
STEP 1.
Begin by removing the bezel that surrounds the climate control switches. To do this, insert the hook tool between the dash pad and the bezel in the upper right corner of the bezel. Make sure the hook tool is hooked behind the bezel and pull toward you releasing one (1) clip. Perform this same action in the remaining three corners releasing three (3) more clips. Set the bezel aside.
STEP 2.
Locate and remove two (2) screws to the right of the farright climate control switch using the #1 Phillips screwdriver.
STEP 3.
Place the Pro.Fit VSMTM over these two screw holes making sure both holes are aligned. Insert the factory screws and tighten.
STEP 4.
Replace the trim bezel securing all clips. Install the hang-up cup onto the Pro.Fit…

Download Volkswagen Jetta & Golf (1994-99) Installation Instructions PDF

Manual Under Automotive, VolksWagen

Related Searches: , , , ,

Comments

Leave a Reply