Backup Camera Input Module for Audi 3G Multi Media Interface System
Installation:
1. Locate a fiber optic connection somewhere in the vehicle. Recommended location would be in the back of the vehicle where the multimedia equipment is located. Usually located on either side of the rear of the vehicle.
2. Remove the fiber optic connector from any optical unit, and then assemble per Optical Cable Connections diagram (see last page.)
3. Once connector is reassembled, reconnect to original unit then connect the new connector into the backup camera module.
4. Power for the backup camera module can be spliced into any good continuous power and ground point. (Verify with a multi-meter.)
5. The blue wire from the backup camera module needs to be connected to the vehicle’s reverse light wire. This wire is usually located by the multimedia equipment in the rear of the vehicle. (Using a multi-meter, the wire will show +12 volts when the vehicle is in reverse.)
Read more
Samsung Model SPT−521J 52″ Projection − Pulsating Pix
Working on a Samsung Compac Theater Model SPT−521J 52″ Projection TV. After warming up for about 5 minutes, the picture would begin to pulsate from regular overall bright to less bright every few seconds. It appeared as if it would change picture mode from standard to mild.
Read more
Micro Celltron Test Kits CTM-100 and CTM-300 Operating Manual
The MICRO CELLTRON is a microprocessor based test instrument that measures the conductance (Ohmic) value of lead-acid batteries and reports the results in Siemens (G). The Micro Celltron will measure the conductance of single cell (2 Volt) through six cell (12 Volt) batteries, either on-line or off-line. Test results are displayed as a direct reading in Mhos (Siemens) and as a percent (%) of a reference conductance value. The Micro Celltron provides quick, accurate, safe, repeatable and easy to understand test results. As many as 252 consecutive test results can be stored internally. The results can be printed via an Infrared Printer (Part #A050) for hard copy documentation, or transferred to a PC with our Battery Management Software and Infrared Receiver module (#C060) for database storage and analysis. The Micro Celltron is fully Y2K compliant.
Read more
PROMATRIX paging stations DPC 4000 Owner’s Manual
The PROMATRIX system includes 5 different paging station models and one paging station extension of the DPC 4000 - series. All paging stations employ gooseneck-microphones, 6 or respectively 8 function keys, and a covered alarm key. An additional key as well as a key-lock switch can be retrofitted. All paging stations are available with 10, 20, 30, or 50 selection keys. All models come with LC-display (2 lines with 16 characters each).
Read more
ESP-2 Eberline Smart Portable Technical Manual
The Eberline Smart Portable (ESP-2) is a data logging, microcomputer-based, portable radiation survey instrument designed to operate with most Eberline radiation detectors. It is designed to be used for routine radiation surveys and allows multiple readings (up to 500), to be stored and later output to a computer or a printer. The ESP-2 may also be used in remote areas, operated solely by a computer via its RS-232 serial communications port.
Read more
OptiDrive Advanced Technical Manual
The Optidrive range consists of a series of products in five physical sizes designed to provide cost-effective, easy-to-use drives for 3ph induction motors in the power range 0.37kW to 90kW. The Optidrive employs open loop voltage and frequency control to regulate the speed of the motor. The digital control is combined with the latest IGBT power semiconductor technology to give a compact, robust solution for general purpose drive applications. The product is designed for ease of use and ease of installation, together with simple programming and commissioning thereby minimising the overall applied cost of a drive solution.
Read more
Spectrophotometer SP-880 Operational Manual
The model 880 visible spectrophotometer is a digital microprocessor controlled instrument, providing photometric absorbance, transmittance and concentration measurements with the wavelength range of 330 to 1100 nm. The spectrophotometer has the following unique features:
1. Two-line, 16-large character LCD display
2. Motorized optical filter wheel and grating
3. Multi-use sample compartment for square cuvettes, 0.5” & 1” round tubes and 50 mm longpath cells
4. Printer and RS232 interface
5. Base-line data for entire wavelength range
6. 100 sets of data storage
7. PC software for machine data download and real-time data reading
Read more
TEP Color LCD Retrofit Kit HP® 85662A Display Installation and User Guide
1-2 The 8566/8567/8568 Color LCD Retrofit Kit is a drop-in replacement for the monochrome CRT in the HP® 85662A display. The Retrofit Kit uses a state-of- the-art Sharp® 6.4” TFT color LCD with a resolution of 640 x 480 pixels.
1-3 The intensity adjustment works as before; adjust the front panel intensity knob as you would for the CRT.
1-4 The front panel align adjustment is no longer used.
Read more
Virtex-4 ML450 Networking Interfaces Platform User Guide
The Virtex™-4 ML450 Source-Synchronous Interfaces Tool Kit provides a complete development platform for designing and verifying applications based on the Virtex-4 LX FPGA family. This kit allows designers to implement high-speed applications with extreme flexibility using IP cores and customized modules. The Virtex-4 LX FPGA, with its column-based architecture, makes it possible to develop highly flexible networking applications.
Read more
ADSL Ethernet USB Combo Modem User Guide
The ADSL Ethernet & USB Combo Modem is the perfect high-speed WAN bridge/Modem. This full-featured product is specifically designed to connect to the Internet. For game users, the ADSL Modem had already pre configured for several low latency game ports. Just click on the game you are playing on line and the rest is done for you The ADSL Modem is fully compatible with all PCs; as long as the PC supports an Ethernet interface and is running a TCP/IP protocol stack, your PC can have high-speed WAN access. So, plug in the ADSL Modem (refer to easy start guide), configure it (per your ISP’s requirements) and enjoy the fast Internet access like never before.
Read more
