POWER STEERING BOX Remove and refit Service tools
The hydraulic pressure gauge in conjunction. with the test adaptor is used for ….. Extract the steering wheel using service tool. 18G 1014.
Content
POWER STEERING BOX Remove and refit Service tools:Drop arm extractor-MS252A
NOTE: It is important that whenever any part of the system, including the flexible piping, is removed or disconnected, that the utmost cleanliness is observed.
All ports and hose connections should be suitably sealed off to prevent ingress of dirt, etc. If metallic sediment is found in any part of the system, the complete system should be checked, the cause rectified and the system thoroughly cleaned.
Under no circumstances must the engine be started until the reservoir has been filled. Failure to observe this rule will result in damage to the pump.
Metric pipe fittings are used with ‘0′ ring pipe ends on the fittings to the steering box. Follow normal ‘0′ ring replacement procedure ;. : ;.: .. . whenever pipes are disconnected. Ensure that compatible metric components are used when fitting replacement pipes.
CAUTION: PRIOR TO REMOVING ANY OF THE COMPONENTS INCORPORATED IN THE STEERING LINKAGE, IT IS IMPERATIVE THAT THE ROAD WHEELS ARE IN A STRAIGHT…
Download Power Steering Box Manual
Related Searches: hydraulic pressure gauge, metric pipe fittings, flexible piping, steering linkage, road wheels
Comments
Leave a Reply
