PONTIAC AZTEC (2001-2005) PART NUMBER PT-70-00 PDF Manual
PONTIAC AZTEC (2001-2005). PART NUMBER: PT-70-00. Pro.Fit. logo and part number will be right side up and readable when installed.
Detail content of this Pontiac Aztez Manual:
TOOLS REQUIRED: Hook tools, #2 Phillips screwdriver, T-15 Torx driver, 7mm socket and driver, masking tape
PARTS INCLUDED: Pro.Fit VSM, instructions.
LOCATION: Right of radio
STEP 1.
Begin by removing the cup holder insert from the shift lever console. Using your hands, grasp the cup holder and gently pull out. Set the cup holder aside. Remove the #2 Phillips screw located in the cup holder cavity. Set the parking brake and put the shift lever into neutral. Next, remove the trim bezel around the shift lever. Using a hook tool, gently pull up on each corner of the bezel to release all four (4) clips. (See photo #1). Lift the bezel off and set aside
STEP 2.
Next, loosen the trim bezel around the radio and climate control module. Locate and remove two (2) T-15 Torx screws from the bottom of the radio trim bezel; one (1) screw each, lower left and lower right. Then, work a hook tool around the radio bezel
Related Searches: torx screws, phillips screwdriver, phillips screw, hook tool, manual tools
Comments
Leave a Reply
