Nokia 1680 Classic User Guide
Get started
Install SIM card and battery
Always switch the device off and disconnect the charger before removing the battery. The SIM card and its contacts can be easily damaged by scratches or bending, so be careful when handling, inserting, or removing the card.
1. To remove the cover, press and slide the back cover toward the bottom of the phone (1).
2. Remove the battery (2).
3. Insert the SIM card (3).
4. Insert the battery (4), and replace the back cover (5).
Charge the battery
Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the AC-3 charger.
Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. This phone is intended for use with a BL-5CA battery. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
1. Connect the charger to a wall socket.
2. Connect the lead from the charger to the charger connector of your phone.
If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.
Get pdf Nokia 1680 Classic User Guide
Related Searches: sim card, wall socket, ac 3, power cord, model number
Comments
Leave a Reply
