K7TA Series Motherboard User’s Manual
Installation Procedure
1. Jumper settings (BIOS and CPU)
2. Installation of CPU
3. Installation of Memory
4. I/O Connections & Panel Connections
In this manual , (1-2) represents the first and second pins of the jumper. (2-3) represents the second and third pins of the jumper. On the motherboard, you will see two sets of jumpers with different color jumper caps: Yellow Jumper Caps : Sets the Function of Flash CMOS JRTC Green Jumper Caps : Sets the type and speed of CPU JF0, JF1, JF2, JF3 (for PCB B or earlier version) JF (for PCB E or later version)
WARNING: Electronic parts are Static sensitive. To prevent damage to the computer and its parts please take the following measures.
Work on a surface such as concrete, linoleum or hard wood floor. Ground your self with either a properly installed grounding strap or by touching a major electrical appliance long enough to discharge the static.
Get pdf K7TA Series Motherboard User’s Manual
Related Searches: hard wood floor, jumper settings, electrical appliance, different color, linoleum
Comments
Leave a Reply
