HP Photosmart 7150 Setup Guide
Be sure to insert the HP Photosmart CD before you connect the printer to your computer with the USB cable.
unpack your hp printer
a. Printer
b. Power module and cord
c. Print cartridge protector
d. Print cartridges (HP #57 and HP #58)
e. Software and Printer Help on CD
f. Documentation
g. Setup Guide
plug in the power cord
1. Plug the power module into the back of the printer (a).
2. Plug the power cord into the power module (b).
3. Plug the power module into a working electrical outlet (c).
load plain paper in the IN tray
1. Lift the OUT tray (a).
2. Pull out the paper length guide (b) on the IN tray.
3. Slide the paper width guide (c) as far to the left as it will go.
4. Move the photo tray slider (d) toward you until it stops. This disengages the photo tray.
5. Place a stack of plain paper into the IN tray (e).
6. Adjust the paper width guide and paper length guide to fit close to the edges of the paper without bending the paper.
7. Lower the OUT tray.
Get pdf HP Photosmart 7150 Setup Guide
Comments
Leave a Reply
