Ford Cosworth Grp N Manual Part 2
The Motorsport Escort RS Cosworth bodyshells are seam welded, strengthened and fitted with a welded in safety roll cage to give high torsional rigidity, long life and inherent safety. Bonnet locking pins should be fitted to the hood top and the tailgate. The best location for the tailgate fixing is on the rear window pillars, below the upper spoiler. Roll cage sleeving is available in two sizes. Use 9092652 on door bars, and 9095218 on the main roll hoop near the occupant’s head.
The netting is useful for carrying helmets and jackets in the rear, or as a map container on the navigator’s door. The trimmed bodyshells include glass, lights, instrument panel, heater and some interior trim but do not include seats or mechanical parts.
Note: The 1994 rollcage changes proposed by FISA will not be applied retrospectively to bodyshells bought during 1993
The under shield is mounted onto a front bracket supported by two aluminium side brackets, a centre support fitted just ahead of the suspension crossmember, and two bolts into the chassis rails. A foam pad should be fitted between the undershield and the suspension cross member/sump. Shields are also available to protect the rear floor pan, windscreen washer bottle, rear axle and production fuel tank. On gravel events mudflaps are recommended.
Get pdf Grp N Manual Part 2
Related Searches: ford cosworth, windscreen washer, torsional rigidity, floor pan, cross member
Comments
Leave a Reply
