Samsung ML-2010 Technical Instructions
Step 1
Having the handle of the cartridge facing you remove two Philips screws one from each side on the top of the cartridge.
Step 2
Grab the top of the cartridge that has the instruction label on it with both hands. Pull the cartridge top up and back towards yourself to remove. This is the waste hopper section of the cartridge and as it is removed may leak some toner. Turn the waste hopper over and place on the table with label facing down.
Read more
EPSON Stylus Pro 4880 Quick Installation Guide
Step for inspecting Sublijet IQ Catridge for loose chips:
1. Check the product package to ensure that the chip remains attached to the cartridge itself and has not dislodged in the plastic bag.
2. Determine if the chip is securely attached by tapping the cartridge a few times on a hard surface, watching to ascertain that the jolt does not dislodge the chip.
3. Once the cartridge is removed from the bag, rub an eraser over the surface of the chip, to determine if it remains stationary within it’s mounting slot. Use of any item other than an eraser is not advised and can damage the chip.
Read more
LevelOne FBR-1415TX Broadband Router w/1USB+1 Parallel Printer Server User Manual
Congratulations on your purchase of this outstanding LevelOne FBR-1415TX Broadband Router. This product is specifically designed for Small Office and Home Office needs. It provides a complete SOHO solution for Internet surfing, and is easy to configure and operate even for non-technical users. Instructions for installing and configuring this product can be found in this manual. Before you install and use this product, please read this manual carefully for fully exploiting the functions of this product.
Read more
Poster Maker 3600 Service Manual
Overall configuration
● The unit allows you to enlarge original documents (maximum width: A4/Letter) and print them on A2 (17″), A1 (23″), B1 (29″) and 36″ width thermal printing paper. It consits of a scanner section, a printer section and a power supply section.
● The unit is equipped with an interface to print from a PC (USB2.0 supported) and a LAN function (10Base-T/100Base-TX) to print on a network.
Read more
HP LaserJet 2200 series troubleshooting guide
Engine test
The engine test verifies that the print engine is functioning correctly. This test is very useful for isolating printer problems, because it does not involve the formatter. Because the engine test prints a full page of lines across the entire printable area, it is also useful for checking and adjusting registration. The engine test prints from the first tray found that contains media and can be activated with the formatter installed or removed. See “Engine test” in chapter 3 for engine test procedures.
Read more
Lexmark E250d and E250dn User Guide
The control panel lights mean different things, depending on their sequence. Lights that are off, on, and/or blinking indicate printer conditions such as printer status, intervention, or service. The following table shows the most common light sequences. Click the indicated page for more information on what it means.
Read more
Lexmark T640, T642, T644 User’s Guide
Use the following table to determine the features and options of your Lexmark™ T640, T642, or T644 printer. The illustrations aid you in determining the installation location of options attached to the printer. For more information about installing input options, see Installing and removing options or the instructions that came with the option.
Read more
BarSTORM Installation Guide
The BarSTORM unit is a powerful multiport print server / network bridge with the capability of translating standard PCL5 escape sequences to print the most commonly used bar codes. The barcodes are generated internally by the BarSTORM’s on board software. The unit uses “BarDIMM inside” technology so is compatible with the most commonly used applications that support PCL5 bar code printing. Additional fonts and form overlays can be stored on the unit and can be associated with each output port using a control list. The device by default comes with 1 USB output and 1 network bridge connection and can be licensed to print to a maximum of 4 local USB PCL5 printers and up to 50 Network ready PCL5 printers. Some of the following configuration information relates to Windows XP, some other systems can be used in a similar manner.
Read more
OKIPAGE 14ex LED Page Printer Maintenance Manual
OKIPAGE 14ex consists of a main control board, a power supply/sensor board, an operator panel, an electrophotographic process mechanism, and revision for illumination of LED head. The main control board receives data via the host I/F, it then decodes, edits and stores the data in memory. After completing the editing of a single page of data, it references the font memory and generates bit image data, which is transferred to the LED head in one dot line units. Through the electrophotographic process mechanism, the data is printed on the paper. The operator panel is used for operations and status display.
Read more
KX-P7110 Operating Instructions
This chapter explains how to configure the KX-P7110 printer on a supported network environment. The KX-P7110 printer provides Ethernet connectivity by functioning as a network print server. The KX-P7110 network function has the following features:
Supports 100Base-TX and 10Base-T
Read more
