1992 Mitsubishi Mirage Auto Trans Overhaul F4A21, F4A22 & F4A23
These Mitsubishi transaxles consist of transmission, torque converter, transfer assembly and differential. The F4A20 series is an electronically controlled, fully automatic 3-speed unit with an overdrive 4th gear. The transaxle consists of a 3-element torque converter with damper clutch, one planetary gear set, one brake band, 4 multiple-disc clutch assemblies. Transaxle shifting points are controlled by the Transmission Control Unit (TCU). The TCU calculates proper shift points using input from various sensors.
Read more
1990-1994 Eclipse Turbo EMS P/N 30-6300 Installation Instructions
This installation is not for the tuning novice nor the PC illiterate! Use this system with EXTREME caution! The AEM EMS System allows for total flexibility in engine tuning. Misuse of this product can destroy your engine! If you are not well versed in engine dynamics and the tuning of management systems or are not PC literate, please do not attempt the installation. Refer the installation to an AEM-trained tuning shop.
Read more
Rebuilding Mitsubishi ECU/ECM’S
Mitsubishi specified certain electrolytic capacitors from 1989 through 1994 made by Rubycon Electric. Here is the most common culprit of ECU trouble: Over time and at repeated elevated temperatures these start to degrade.
The liquid electrolyte begins leaking from the seal on the bottom plug of the capacitor. This liquid is very corrosive and conductive. It interacts with the humidity coating on the circuit board causing an array of problems. Among these are: injector trouble, erratic start, stalling, rough idle, check engine light, etc. This leaked substance begins to spread and react with metals in its path. It gradually causes Read more
2003 Mitsubishi Galant ES Timing Belt & Balance Shaft Belt
Removal Timing Belt for Eclipse & Galant
1. Raise and support vehicle. Remove engine splash shield from right side wheelwell.
2. Lower vehicle. Support weight of engine with floor jack. If necessary, remove coolant reservoir. Remove upper engine mount located near timing belt cover. Remove all drive belts. If necessary, remove drive belt tensioner pulley bracket and power steering pump pulley. See Fig. 1 . Remove water pump pulley.
3. Remove crankshaft pulley. Noting bolt lengths and locations, remove upper and lower timing belt cover with gasket.
CAUTION: DO NOT rotate crankshaft counterclockwise (as viewed from timing belt end of engine). If timing belt is to be reused, mark direction of rotation before removing.
Read more
1989-1999 Mitsubishi Eclipse Turbo 4G63 Fuel Rail AN Adapter Kit
The installation of this Fuel Rail Kit requires the removal and installation of fuel system components. Improper assembly/installation may result in bodily injury or property damage. If you are not qualified to perform this installation, please refer the installation to a professional. Read and understand these instructions before attempting to install this product.
Read more
2003 Mitsubishi Lancer Evolution VIII Technical Information Manual PDF
This manual contains the technical information for 2003 Mitsubishi Lancer Evolution VIII, if you need more information you can get the PDF file below.
Read more
MITSUBISHI FUSO Manual PDF
Major Redesign Marks 2005 Models from Mitsubishi Fuso From class 3 to class 7, eight new Mitsubishi Fuso cabover models reflect significant upgrades in performance, handling, durability, comfort, aesthetics, and value. Newport Beach, CA, May 19, 2004 - Across the board, the new line-up of 2005 Mitsubishi Fuso cabover medium-duty trucks evidence enhancements and upgrades, including a road-toroof redesign for the FE models. Eight models cover weight ratings from class 3 through class 7, and address virtually every vocational need from dry freight, refrigerated delivery, landscaping and delicate cargo transport to auto recovery, heavy duty hauling, municipal roadwork and snow plowing.
Read more
Mitsubishi M37532T-PTC Instruction Manual
Regarding the change of names mentioned in the document, such as Mitsubishi Electric and Mitsubishi XX, to Renesas Technology Corp. The semiconductor operations of Hitachi and Mitsubishi Electric were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.) Accordingly, although Mitsubishi Electric, Mitsubishi Electric Corporation, Mitsubishi Semiconductors, and other Mitsubishi brand names are mentioned in the document, these names have in fact all been changed to Renesas Technology Corp. Thank you for your understanding. Except for our corporate trademark, logo and corporate statement, no changes whatsoever have been made to the contents of the document, and these changes do not constitute any alteration to the contents of the document itself.
Read more
Protocol Driver Manual Mitsubishi FX/FX0 ProVicom Manual
Protocol Driver Manual Mitsubishi FX/FX0. Page 4 of 49 ….. Mitsubishi FX. X2. 25pole Sub-D. 25pole Sub-D. Refer to Device Manual, chapter “Suppression …
Read more
